Charging Applicators are energized by Chargemaster Power Supplies, or similar, to produce ions and propel the materials toward the ground reference. The ions charge the material, electrostatically bonding the material to another surface or ground. This attraction cause the temporary bonding or pinning of one material to the other.
SIMCO has the following Charging Applicators :
Charging Applicators | Size |
|
|
TETRA Bars | Dia 1.31" x (6" to 144") |
|
|
Multi-Point Applicator | Dia 1.125" |
|
|
Pinner Blade | 0.75" x 2.5" x 7" |
|
|
Pinner 5 Point | Dia 0.75" x 7" |
|
|
Pinner Claw | Dia 0.75" x 7" |
|
|
Pinner Arc-Resistant Bars | 3.25" x 0.75" x (6" to 144") |
|
|
Pinner SuperBar | 1.25" x 6.5" x 14.25" |
|
|
Distinguished by its rugged construction, the TETRATM Bars consists of a row of emitter points mounted in a round rigid housing. Straight-end high voltage connector as standard, with optional available on right angle connector.
Power Required :
All Chargemaster Power Supplies or similar models rated at +/-30kVDC.
Cable :
- detachable 10' standard length and 50kV rated
and flame retardant protective sleeve.
Size :
- Bar Diameter : 1 5/16" in diameter
- Bar Length : 6" to 141" in effective length
with 3" increment.
Power Required :
All Chargemaster Power Supplies or similar models rated at +/-30kVDC.
Cable :
- detachable 10' standard HV cable
Size :
- Bar Diameter : 1 1/8" in diameter
Arcing can cause a multitude of problems such as EMI interference, shutdown of production lines, and personel injury. Pinners are arc-resistant to avoid suspension of static charge and loss of pinning action. They are current limited to ensure operator and equipment safety.
Claw Pinner has the same size as 5 Point Pinner. But, instead of 5 point, its has movable 3 emitters
Power Required :
All Chargemaster Power Supplies or similar models rated at +/- 30kVDC.
For use with +/-50kVDC, special provisions have to be made.
Cable :
- detachable 10' standard HV cable
Operating Characteristics :
Current Limited : 0.375 mA at 30kV input and
0.625mA at 50kV input
Operating Distance : 0.5" at 30kV input and 1"
at 50kV input
Operating Temperature : Up to 260 deg C.
Charging Pattern at 1" operating distance :
- Blade Pinner : 0.5" x 2.5"
- 5 Point Pinner : 1" diameter
- Claw Pinner : depending on separations of the
3 emitters.
Size & Material :
- Teflon Handler : 0.75" in diameter
- Overall length : 7"
Weight : 0.65 lbs max.
When powered by SIMCO's Chargemaster power supplies, Pinner Arc-Resistant Bars deliver safe electrostatic charge to temporarily pin or bond materials. It features with current-limited, arc-resistant and replaceable emitter pins.
Power Required :
All Chargemaster Power Supplies or similar models rated at +/- 30kVDC.
For use with +/-50kVDC, special provisions have to be made.
Cable :
- 10' standard length, and silicone with flame
retardant protective sleeve. Straight and Right angle exit are available.
- Optional : Right angle exit detachable cable
Operating Characteristics :
Operating Temperature : Up to 260 deg C.
Size :
- Cross-section : (H) 3.25" x (W) 0.75"
- Bar Length : 6" to 141" in effective length
with 3" increment
Weight : 2 lb 2 oz per foot.
The Pinner Superbar is built for the most demanding pinning tasks such as catalog stacking. Catalogs with UV coatings on the cover, once impossible to stack with static, can now often be stacked without the use of strapping machines.
Power Required :
All Chargemaster Power Supplies or similar models rated at +/- 30kVDC.
Cable :
- Removable 10' standard length, 50kV rated and
flame retardant protective sleeve.
Size :
- Bar Profile : (D) 1.25" x (W) 6.5" with cover
plate
- Bar Length : 14.25" in overall length and 10.5"
in effective length
Weight : 5.5 lbs
Materials :
- Inner Bar : RTV Silicone Compound
- Case : PVC
Remarks :
- Do not install bars face to face any closer
than 3"
- Turn off the Charging Power Supplies when publication
flow will be interrupted for more than 20 minutes
Specification are subjected to change without prior notice
(End of Page)